Skip to content
14-day free trial, no card9 languages176 business types · 50 apps
EN· USD
Try a live demoStart free trial

Fix a barcode scanner that types wrong characters

Use «Test scan» to see what the scanner sends, then fix the keyboard layout, prefix / suffix, Caps Lock or the GS1 separator.

Last updated November 4, 20261 min read

Steps

  1. Open Devices & printers → This device and scan one of the codes under «Test scan» (print the page if your scanner is a laser scanner).
  2. If «Check» says the characters are swapped by the keyboard layout, set «Keyboard layout» to «Always physical keys».
  3. If it shows a prefix or suffix, type it into «Prefix and suffix» (this device), or under the station's scanner rules for every device.
  4. If the GS1 separators are missing, switch on «transmit GS / FNC1 as Ctrl+]» in the scanner's setup (its manual has a barcode for it).
  5. Scan again until «Check» says «Correct».

Tips

  • Upper and lower case swapped: Caps Lock is on.
  • A Bluetooth scanner that loses characters: raise «Longest gap» for the station.
Was this helpful?

Next steps

Still need help?

Ask the assistant, or contact the team and we reply by e-mail.