Fix a barcode scanner that types wrong characters
Use «Test scan» to see what the scanner sends, then fix the keyboard layout, prefix / suffix, Caps Lock or the GS1 separator.
Lesson 6 of 6 · Step by step
Step by step
Open Devices & printers → This device and scan one of the codes under «Test scan» (print the page if your scanner is a laser scanner).
/admin/devicesIf «Check» says the characters are swapped by the keyboard layout, set «Keyboard layout» to «Always physical keys».
/admin/devicesIf it shows a prefix or suffix, type it into «Prefix and suffix» (this device), or under the station's scanner Rules One switch per kind of automatic marketing: social posts, weekly digest, lead nurture, quotation follow-up, review request, unpaid-order reminder, seasonal promos and re-engagement. More words in the glossary for every device.
/admin/devices?tab=stationsIf the GS1 separators are missing, switch on «transmit GS / FNC1 as Ctrl+]» in the scanner's setup (its manual has a barcode for it).
/admin/devicesScan again until «Check» says «Correct».
/admin/devices
Where to find it
- Devices & printers → This device → Barcode scanner
/admin/devices
Checklist
Before you move on, check that you can:
- Open Devices & printers → This device → Barcode scanner
- If Check says the characters are swapped by the keyboard layout, set Keyboard layout to Always physical keys.
- If it shows a prefix or suffix, type it into Prefix and suffix (this device), or under the station's scanner…
- If the GS1 separators are missing, switch on transmit GS / FNC1 as Ctrl+] in the scanner's setup (its manual…
- Scan again until Check says Correct.
Tips and common mistakes
- Upper and lower case swapped: Caps Lock is on.
- A Bluetooth scanner that loses characters: raise «Longest gap» for the station.