Take a car in and inspect it
Record the car by VIN or plate with its specification, the documents and keys you received and the seller, then inspect it with the checklist, tires, OBD codes, damage map and photos.
Lesson 15 of 22 · Step by step
Step by step
In «Stock & intake» fill in «Take a car in»: VIN (17 characters — the check digit is verified for North-American VINs) or plate, make, model, year, odometer and the specification.
/admin/car-dealer/stockTick the documents and keys you received and enter the seller; the ID number is stored encrypted and shown only with the right.
/admin/car-dealer/stockOn the car’s page add photos and press «Start inspection».
/admin/car-dealer/stockGo through the seven sections (pass / advise / fail), measure the tire tread, type the OBD codes, tap the damage on the car diagram and add the reconditioning estimate.
/admin/car-dealer/stockPress «Finish inspection»: the grade is fixed (the suggestion from the checks is shown next to it) and the report PDF is ready.
/admin/car-dealer/stock
Where to find it
- Stock & intake
/admin/car-dealer/stock
Checklist
Before you move on, check that you can:
- Open Stock & intake
- In Stock & intake fill in Take a car in: VIN (17 characters — the check digit is verified for North-American…
- Tick the documents and keys you received and enter the seller; the ID number is stored encrypted and shown…
- On the car’s page add photos and press Start inspection.
- Go through the seven sections (pass / advise / fail), measure the tire tread, type the OBD codes, tap the…
- Press Finish inspection: the grade is fixed (the suggestion from the checks is shown next to it) and the…
Tips and common mistakes
- A finished inspection cannot change — start a new one to record changes.
- Tires below 1.6 mm fail, below 3 mm are advised.