Pular para o conteúdo
14 dias de teste grátis, sem cartão10 idiomas176 tipos de negócio · 50 apps
PT· USD
Experimente uma demonstração ao vivoComeçar teste grátis

Este guia ainda não foi traduzido, por isso é exibido em inglês.

Take a car in and inspect it

Record the car by VIN or plate with its specification, the documents and keys you received and the seller, then inspect it with the checklist, tires, OBD codes, damage map and photos.

Cerca de 1 minRevisado em

Antes de começar

  • Um espaço de trabalho zmle e um login com permissão para esta tarefa.

Passos

Onde: Stock & intake

  1. In «Stock & intake» fill in «Take a car in»: VIN (17 characters — the check digit is verified for North-American VINs) or plate, make, model, year, odometer and the specification.
  2. Tick the documents and keys you received and enter the seller; the ID number is stored encrypted and shown only with the right.
  3. On the car’s page add photos and press «Start inspection».
  4. Go through the seven sections (pass / advise / fail), measure the tire tread, type the OBD codes, tap the damage on the car diagram and add the reconditioning estimate.
  5. Press «Finish inspection»: the grade is fixed (the suggestion from the checks is shown next to it) and the report PDF is ready.

Dicas

  • A finished inspection cannot change — start a new one to record changes.
  • Tires below 1.6 mm fail, below 3 mm are advised.

Algo errado?

Pergunte ao assistente com suas palavras ou fale com a equipe: respondemos por e-mail.

Isto foi útil?

Próximos passos

Ainda precisa de ajuda?

Pergunte ao assistente ou fale com a equipe, e respondemos por e-mail.